Pressure
Systems: Guidelines on Periodicity of Examinations
Ref: PSG1 (ISBN 1 901212 10
6)
Date of Publication: May 1997
Members Price £Free
UK Price £25.00
Overseas Price £35.00
The information contained in these Guidelines
is based on the collective experience of SAFed member companies
and gives practical guidance on the recommended intervals between
successive examinations of pressure systems. It also considers those
areas which should be investigated when considering an extension
of existing intervals.
Members Price £Free
UK Price £25.00
Overseas Price £35.00
These Guidelines are intended to assist competent
persons when considering the controls and limiters fitted to existing
boiler installations.
The information contained within the Guidelines is not intended
as a specification for boiler controls in new installations. These
should be manufactured in accordance with the Pressure Equipment
Directive and should comply with the requirements of relevant Harmonised
European Standards supporting the directive, with levels of supervision
and training to be appropriate to specific site requirements.
Members Price £Free
UK Price £25.00
Overseas Price £35.00
These Guidelines supplement the information
provided in PSG2. They are intended to assist competent persons
when considering the controls and limiters that should be fitted
to existing fully flooded hot water boiler systems in order to ensure
safe operation.
Guidelines
for the Production of Written Schemes of Examination and the
Examination of Pressure Vessels Incorporating Openings to
Facilitate Ready Internal Access
Ref: PSG4 Publication Date: April 2003.
Members Price £Free
UK Price £25.00
Overseas Price £35.00
The purpose of these Guidelines is to provide
guidance for the drawing up of Written Schemes of Examination (WSE)
in accordance with the Pressure Systems Safety Regulations 2000
(PSSR 2000) and the associated examination of pressure vessels incorporating
means for ready internal access. They are intended to assist competent
persons when assessing the protective, safety and control devices
fitted to such pressure vessels.
Guidelines for the Examination
of Shell-to-Endplate and Furnace-to Endplate Welded Joints
Ref: SBG1 (ISBN 1 901212 05)
Date of Publication: April 1997
Members Price £9.00
UK Price £30.00
Overseas Price £40.00
This publication is written specifically
for owners, users and competent persons performing duties under
the Pressure Systems Safety Regulations 2000. It describes those
procedures considered to be good practice, and incorporates advice
in assessing defects in shell-to-endplate welds and furnace-to-endplate
welds in shell boilers.
Members Price £Free
UK Price £30.00
Overseas Price £40.00
This publication is aimed at owners, users
and competent persons who have duties under the Pressure Systems
Safety Regulations 2000. Based on methods of measurement developed
by inspection organisations, it describes procedures which will
reduce the risk of boiler cracking and subsequent explosions. These
guidelines also provide detailed guidance on ultrasonic testing
and report provision.